Removing drive cover, Loosening drive chain, Disconnecting the reel drive method – MacDon D65 SP DHOM User Manual
Page 246
Advertising
Removing Drive Cover
1.
Remove the six bolts (B) that secure the upper cover
(A) to the reel drive and to the lower cover (C).
NOTE:
The lower cover (C) may also be removed by
taking off the three bolts (D).
Figure 6.238: Double Reel
Loosening Drive Chain
1.
Loosen nuts (A). Slide motor (B) and motor mount (C)
down towards reel shaft.
Figure 6.239: Reel Drive
Disconnecting the Reel Drive Method
1.
Support inboard end of right reel with a front end loader
and nylon slings (or equivalent setup).
NOTE:
To avoid damaging or denting center tube, support reel
as close as possible to the end disc.
Figure 6.240: Supporting Reel
169899
234
Revision A
Advertising