MacDon D65 SP DHOM - Manual (Page 271)

8 Options and Attachments
The following options and attachments are available for use with your header. Most come with installation
instructions. See your MacDon Dealer for availability and ordering information.
8.1 Reel
8.1.1 Lodged Crop Reel Finger Kit
The steel fingers attach to ends of every other tine bar and
help in clearing material in heavy, hard-to-cut crops such
as lodged rice.
Each kit contains three fingers for the cam end and three
fingers for the tail end of the reel. Hardware, installation
and adjustment instructions are included with the kit.
MD #B4831
Figure 8.1: Lodged Crop Finger
8.1.2 PR15 Tine Tube Reel Conversion Kit
This kit allows conversion of a 6-bat reel to a 9-bat reel.
Order bundles by header size and type:
• 15 ft. – Steel Fingers MD #B5654
• 20 ft. – Steel Fingers MD #B5655
• 25 ft. – Plastic Fingers MD #B5277
• 30 ft. – Plastic Fingers MD #B5278 20
• 30 ft. – Steel Fingers MD #B5657
• 35 ft. – Plastic Fingers MD #B5674
NOTE:
Must order additional endshields when converting reel.
20. Double reel units only
169899 259 Revision A