MacDon R85 Rotary Disc 13 Foot Self-Propelled Windrower Header - Manual (Page 128)

MAINTENANCE AND SERVICING
Installing a Disc
CAUTION
Exercise caution when working around the blades.
Blades are sharp and can cause serious injury.
Wear gloves when handling blades.
1. Position new disc on spindle ensuring it is 90° to the
adjacent discs.
Figure 7.25
2. Install cover (B) and secure with four bolts (A).
Tighten bolts.
3. Reinstall previously removed rotary deflector (if
applicable). See Section
• Installing the Driveline Deflector, page 131
• Installing the Driven Deflector, page 130
4. Close cutterbar door(s). See Section 5.5 Cutterbar
Doors, page 30 .
Figure 7.26
169455
120
Rev. E