MacDon R85 Rotary Disc 13 Foot Self-Propelled Windrower Header User Manual
Page 63
Advertising
4. Disconnect electrical harness at connector (A).
5. If couplers and coupler lock are installed on lines,
proceed as follows. Otherwise, proceed to step
Detaching the Header (M205 Windrowers), page 56
.
Figure 5.55
6. Disconnect 1/2 in. (12.7 mm) hose (B) from windrower
coupler and remove lynch pin (A).
Figure 5.56
7. Open up coupler lock (A).
8. Remove lock from couplers (B).
Figure 5.57
169455
55
Rev. E
Advertising