Information on these operating instructions, Warnings repairs, Personal injuries – Retsch ZM 200 User Manual
Page 3: Material damage
08.02.2012
Retsch GmbH
3
0003
Information on these operating
instructions
The present operating instructions for the Ultra Centrifugal
Mill of type ZM200 provide all the necessary information on
the headings contained in the table of contents.
They act as a guide for the target group(s) of readers
defined for each topic for the safe use of the ZM200 in
accordance with its intended purpose. Familiarity with the
relevant chapters on the part of each target group(s) of
readers is essential for the safe and proper use of the
equipment.
The present technical documentation has been designed
both as a source of reference and as a learning tool. Each
chapter is a self-contained unit.
The operating instructions do not contain any repair
instructions. Should repairs ever become necessary, please
contact your supplier or talk directly to Retsch GmbH.
Warnings
The following signs are used to warn of hazards:
Personal injuries
Material damage
Repairs
These operating instructions do not contain any repair
instructions. In the interests of your own safety, repairs
should only be performed by Retsch GmbH, an
authorised representative or by Retsch service
technicians.
In this case, please notify the following:
Your local Retsch representative
Your supplier
Retsch GmbH direct
Your address for service: