Salsbury Industries 92000 Series Plastic Lockers (92168,92368 Double Tier) User Manual
Page 4
Plastic Lockers – 92000 Series
Models 92168 & 92368 Double Tier
Assembly Instructions
SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: 1-800-562-5377 Int’l Phone: 323-846-6700
Fax: 1-800-562-5399 Int’l Fax: 323-846-6800
www.lockers.com engineering
@
lockers.com
Step 15. Install placards (optional) in the indentation near the top of
each door.
Step 16. If two (2) or more lockers are to be installed side by side,
the lockers should be fastened together with the four (4) nuts and
long screws provided. Select two (2) available holes toward the front
and any two (2) holes toward the rear. The illustration below shows
the 12 holes that are available. The lower illustration shows the
inside view of a hole and screw.
NO
NO
NO
NO
INSIDE VIEW
OF HOLE
AND SCREW
The assembly of the plastic lockers is now complete.
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2010 Salsbury Industries. All rights reserved. (Rev. 05, 7/22/2010) Page 4 of 4