SATEC PTS175 Manual - Manual (Page 11)

‎Appendix A Technical Specifications
PTS175 MV Advanced Analyzer 11
Appendix A Technical Specifications
PTS – Pole Top Sensor:
A.1 Electrical Ratings:
PTS MODEL 9650/E1104 9660/E1304 9670/C14C0
Insulation Class 15kV 25kV 35kV
Impulse 110kV 150kV 200kV
AC withstand – 1mn 34kV 40kV 50kV
Voltage Ratio 1400:1 3300:1 10000:1
Current Ratio 600A:10V 600A:10V 600A:10V
Low Frequency dry flashover 80kV 110kV 125kV
Low Frequency wet flashover 60kV 85kV 100kV
A.2 Mechanical:
PTS MODEL 9650/E1104 9660/E1304 9670/C14C0
Insulation Class 15kV 25kV 35kV
Cantilever strength (ultim. lbs) 2800 2800 2800
Weight (lbs) 39 49 59
Shipping weight (lbs) 44 54 64
A.3 Operating Temperature
Temperature range: -40°C to +65°C
A.4 Conductor Diameter range
The two-sided keeper is made of aluminum (for aluminum conductor) or
galvanized ductile iron (for copper conductor) and can accommodate a 0.25 inch
to 1.25 inch diameter conductor
A.5 Basic Construction
The Multicore Sensor is molded from POLYSIL, a high dielectric strength, anti-
tracking polymer concrete developed by Lindsey Manufacturing Company under
EPRI contract
PTS175 MV ANALYZER
A.1 Environmental Conditions
Operating temperature: -30°C to 55°C (-22°F to 131°F)
Storage temperature: -30°C to 85°C (-40°F to 185°F)
Humidity: 0 to 95% non-condensing
A.2 Construction
Dimensions see Figure 2-1
Weight: 8.5 kg (18.74 lbs)
Materials
Case enclosure: Reinforced Polyester
Packaging case: Carton and Stratocell® (Polyethylene Foam) brackets