Remember: for safety’s sake, always buckle up – Schroth Racing QuickFit And QuickFit Pro Subaru WRX/STi (2002-2006) User Manual
Page 12
12
4 Cleaning
To clean the belt, use soap and warm water. Do not use any
solvents! Do not dry the belt in the sun or near a radiator.
Improper cleaning or drying of the harness belts can
weaken them, reduce their effectiveness and can result in
serious personal injury or death.
5 Subaru STi QuickFit
®
Vehicle Reference List
Subaru STi
04-05 STI/WRX
6
SUBARU STI Quick-Fit Part Numbers
Verify you have the correct belt for your car. The following part
numbers apply only to SUBARU STI QuickFit
®
Belts.
Quick Fit Pro Belts #SR-18x7x
SUBARU STI Quick Fit
®
Rallye 4 Black Left
SR-16170
SUBARU STI Quick Fit
®
Rallye 4 Black Right
SR-16670
SUBARU STI Quick Fit
®
Rallye 4 Blue Left
SR-16171
SUBARU STI Quick Fit
®
Rallye 4 Blue Right
SR-16671
SUBARU STI Quick Fit
®
Rallye 4 Red Left
SR-16172
SUBARU STI Quick Fit
®
Rallye 4 Red Right
SR-16672
SUBARU STI Quick Fit
®
Rallye 4 Silver Left
SR-16179
SUBARU STI Quick Fit
®
Rallye 4 Silver Right
SR-16679
SUBARU STI Quick Fit
®
Pro
Black Left
SR-18170
SUBARU STI Quick Fit
®
Pro
Black Right
SR-18670
SUBARU STI Quick Fit
®
Pro
Blue Left
SR-18171
SUBARU STI Quick Fit
®
Pro
Blue Right
SR-18671
SUBARU STI Quick Fit
®
Pro
Red Left
SR-18172
SUBARU STI Quick Fit
®
Pro
Red Right
SR-18672
SUBARU STI Quick Fit
®
Pro
Silver Left
SR-18179
SUBARU STI Quick Fit
®
Pro
Silver Right
SR-18679
7
Installation Accessories & Spare Parts
If any part of your harness needs replacement, please contact
your nearest dealer. USE ONLY GENUINE SCHROTH
PARTS.
www.schrothracing.com
We reserve the right to incorporate any technical
changes or further development in this product
without notice.
If you need additional information or have any comments
or questions about the SCHROTH asm
®
harnessbelts,
please contact your dealer or the importer. You can visit
www.schrothracing.com
for any other information.
REMEMBER:
For safety’s sake, always buckle up.
SCHROTH
and SCHROTH asm
®
are registered trademarks of
SCHROTH Safety Products GmbH, Germany.
The SCHROTH asm
®
safety system is patented in several European
countries, the United States and Japan.
The copyrights of this Installation and Operating manual are
property of SCHROTH Safety Products GmbH, Germany.
Copyright of this part or in hole, on paper, on film or
electronically is allowed only after written permission by
SCHROTH Safety Products GmbH, Germany.
© 2006, SCHROTH Safety Products GmbH, Arnsberg, Germany.
Imported to North America exclusively by:
HMS Motorsport LTD
3 First Avenue
Peabody, MA 01960
www.hmsmotorsport.com
www.schrothracing.com
Phone: 978.532.1170
Toll Free: 888.467.3269
Fax: 978.532.2016
EA 2.6 Rev. 3/07
Figure A:
Fold the strap to a loop and insert it
upwards throughout the metal frame and
turn the loop as indicated.
Note:
The strap part protruding from the
adjuster for further adjustment [1] must
be located above the stress taking strap
[2].
Figure B:
Position the plastic cover on top of the
loop and insert the metal retainer [3]
through the guides of the plastic cover
and the strap loop.
Figure C:
Keep the metal retainer positioned
between your thumb and forefinger.
Slide the plastic cover backwards onto
the metal frame as indicated until both
ratchets [4] locks with a distinct clicking
sound into the detentions in the metal
frame.
Figure D:
Check by pulling both stress taking
straps [2] and [2`] the adjustment device
will lock safely.