SciGene 700 Microarray Oven User Manual
Page 12
Model 700 Microarray Oven — USER MANUAL
Version 2.1, February 2011 (408) 733-7337, [email protected]
11
V. TROUBLESHOOTING
Symptom
Cause
Solution
Rotator does not turn
after closing door
Rotator control is in the off
position
Turn on rotator
Door does not shut or
is difficult to open
Latch is improperly
adjusted
Adjust threaded
rod on inside of
latch
Temperature is erratic
Thermal controller is
defective
Replace controller
VI. SPECIFICATIONS
Electrical (Oven Unit)
Cat. #1070-00-1
115V AC; 50/60 Hz; 350 W
Cat. #1070-00-2
230V AC; 50/60 Hz; 350 W
Dimensions
Interior Chamber
14 W x 14 D x 14 H inches
36 W x 36 D x 36 H cm
Exterior
18 W x 17 D x 22 H inches
45 W x 40 D x 56 H cm
Weight
Net
70 lbs (32kg)
Gross
75 lbs (34kg) Includes shipping carton
Performance and Controls
Temperature Range
Ambient +5°C to 99°C
Temperature Control
± 0.1°C
Heat up Time
3°C per minute
Temperature Controller
Digital PID, single loop
Temperature Display
Actual / Set Dual LED
Rotation Speed
Up to 20 RPM
Chamber
Stainless Steel
Digital Thermometer Output Thermocouple
VII. ROTATORS AND ACCESSORIES
Cat. #
Description
UOM
1070-20-0 Rotator
for
Agilent
SureHyb and Original Version
Hybridization Chamber. Holds 20 chambers
Each
1052-23-0 General Purpose Rotator
Each
1052-24-0 Loading Stand for General Purpose Rotator
Each
1040-21-0 Removable
Rocking
Platform
Each
1040-21-1 Rotator for 10 large/20 small hybridization tubes
Each
1040-01-0 Hybridization tube, 35x300 mm with screw cap
Each
1040-02-0 Hybridization tube, 35x150 mm with screw cap
Each
1051-52-0
Digital thermometer with NIST certificate of calibration
Each