SPYPOINT TINY-7 - Manual (Page 11)

20 21
English
English
Infrared:
(On/One LED/
Off)
Allow the user to choose how many LEDs
will be turned on.
On: Every LEDs work when taking
photos or videos at night.
One LED: Only a single LED works
(see figure). This option can be useful
when using an IR-Booster/Black LEDs
IR-Booster (sold separately, refer to the
section OPTIONS).
Off: LEDs are deactivated so your night
photos or videos are pitch black.
Power:
(Batteries/
Electricity)
Allow the user to select the battery power
or the electricity power.
Choose «Electricity» if the camera is
powered by a main electric supply.
(using a 12-volt DC adapter AD-12V,
sold separately). Main electric supply is
recommended for security purposes. It
provides an instant trigger time when a
movement is detected. The lithium battery
pack and the AA batteries can remain
safely inside the camera and it is ideal in
case of a blackout. A 12-volt DC adapter
that can provide a minimum of 800 mA is
required (See OPTIONS for accessories).
Note: When using the electricity power,
the «Multi-shot» mode and the «Delay»
between photos are disabled as the camera
starts instantly every time it detects
motion. Also, the imprinting temperature
on each picture is disabled.
LED for
infrared
sensor