SPYPOINT TINY-7 - Manual (Page 5)

8 9
English
English
BOTTOM VIEW
1. Power button
2. LED recording indicator
3. UP button
4. BACK button
5. OK button
6. DOWN button
7. ALK / RECH (switch for battery)
8. SD card slot
9. USB port
10. 12-volt jack
11. External trigger jack
12. TV OUT
13. Removable battery case
7.
10. 9.
11.
13.
8.
12.
Connector Connector
Top
POWER
The battery level is shown in the REPORT mode.
(4/4 = full, 1/4= low) When the battery level shows 2/4,
the camera will continue to take pictures but we strongly
recommend changing the batteries before they are empty.
AA batteries
This camera requires the use of 6 AA batteries (1.5V). The
use of alkaline or lithium batteries is strongly recommended.
During the installation of the AA batteries, slide the switch
inside the battery case to ALK. Insert the batteries in the
battery case as indicated and insert it inside the camera (see
figure below). Exact polarity must be followed. We also
recommend the use of new batteries to ensure maximum
performance of your camera.