SPYPOINT TINY-7 - Manual (Page 7)

12 13
English
English
Solar panel
This model also offers the possibility of a connection to
a solar panel SP-12V (sold separately, refer to the section
OPTIONS) to maintain the charge of the lithium battery
(sold separately, refer to the section OPTIONS). During the
installation of the rechargeable lithium battery pack, slide
the switch inside the battery case to RECH to activate the
charging system of the solar panel.
Power source Switch position
• 6AA
• 12V
• 12V + 6AA
ALK
• LIT-09
• 12V + LIT-09
• Solar panel + LIT-09
RECH
MEMORY CARD
Using a memory card (sold separately, refer to the section
OPTIONS) is required to operate the camera. When the
camera is turned on, the screen displays "Insert memory
card" in PHOTO, VIDEO or TEST mode if no memory card
is used, the camera also beeps. The camera is compatible
with SD/SDHC memory card, up to 32 GB capacity. Before
inserting or removing the memory card, the camera must
be turned off. Failing to do so may cause loss of or damage
the pictures already recorded from the memory card. When
the SD card is full, the viewing screen indicates "Disk full"
when PHOTO, VIDEO or TEST mode are selected. The
following data shows an approximate quantity of photos or
video length that can be taken by the camera depending on
the memory card capacity.
RESOLUTION 2.0 GB 4.0 GB 8.0 GB 32 GB
3 MP
5 MP
7 MP
8 MP
2000
1700
1400
1200
4100
3400
2700
2400
8200
6800
5500
4800
32800
27300
21800
19000
VIDEO
RESOLUTION
2.0Go 4.0Go 8.0Go 32Go
640 x 480
1280 x 720 (720p)
65 min
20 min
2h10
40 min
4h10
1h20
16h40
5h20
"BUSY" LED
The "BUSY" light, located beside the LCD screen, lights up
when the camera records a file.