Side sensors – SPYPOINT TINY-7 User Manual

Page 12

Advertising
background image

22

23

English

English

Side
Sensors:

(On/Off)

When the side sensors are activated, a
total of 7 zones is covered. The central
sensor covers 5 zones. The side detectors
are mainly used to prepare the camera
so when your target passes through the
central sensor, the system is already pre
triggered, increasing greatly the reaction
time of your camera.

Note: The side sensors require more
battery power.

Time Lapse:

(Off/30s/1m/3m/
5m/15m/30m/1h)

Allow the user to set the frequency at which
time the camera takes a picture, without
detection. For example, if the option
"5 minutes" is selected in the "Time Lapse"
mode, the camera takes a picture every
5 minutes during that period of operation
(start time and stop time) even if there is no
detection.

This option allows the user to obtain pictures
of game outside the detection range of the
camera.

Note: The "Time Lapse" mode only
applies in PHOTO mode, not in VIDEO
mode. When "Time Lapse" mode is
selected, the "Delay" mode and the
"Multi-shot" mode are disabled. The
photo resolution remains the same except
for the low resolution which are reduced
to 800 x 600.

REPORT
The report mode keeps a record of the last period of use of
the camera. The beginning date corresponds with the moment
the camera is set to either PHOTO or VIDEO mode. Thus,
the report is reset when changing modes.

26’

(8m)

30’

(9m)

50’

(15m)

30°

70°

40°

6

&

6

Camera

Detection distance

(central)

Detection angles

Detection distance

of the side sensors

s: side sensors

c: central sensor

Viewing angle

Advertising
This manual is related to the following products: