Summit DW2432SS User Manual - Manual (Page 15)

13
Cancellation of a program
To cancel a program while the dishwasher is
running:
1. Press the Start/Pause button for 5 seconds.
The indicator light will start flashing.
2. The dishwasher will drain the water inside the
machine for 45 seconds.
3. The program is cancelled when indicator light
goes off.
4. Then, you can choose and start a new
program.
WARNING
Depending on the stage of the program you
have cancelled, there may be detergent
residue or rinse aid inside the machine and
on the dishes. Make sure the items in the
dishwasher are not used before washing
properly. Ingestion or inhalation of detergent
or rinse aid may cause serious injury. Avoid
contact with skin and eyes and keep children
and infirm persons away from these
materials.
Program change
To change a running program:
1. Press the Start/Pause button. The indicator
light on the button will turn off.
2. Select a new program and start it with the
Start/Pause button. The respective program
diode lights up.
CAUTION
The new program will NOT start right from
the beginning. It will start from the stage last
carried out by the previous program
selection.
WARNING
Depending on the length of the terminated
program, detergent and rinse aid may still be
in the dispensers. Ingestion or inhalation of
detergent or rinse aid may cause serious
injury. Avoid contact with skin and eyes, and
keep children and infirm persons away from
these materials.
CONTROL INDICATOR LIGHTS
Program selection via diode
lights.
Number and order of the
programs may vary depending
on model.
Rinse aid level indicator light
(depending on model)
If this indicator light comes on, you have to refill
rinse aid.
You can also tell whether rinse aid must be
refilled by looking at the rinse air dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the color is light, open the dispenser and
refill rinse aid.
Salt level indicator light
(depending on model)
When this indicator light comes on, you must
refill special salt. Only use special dishwasher
salt in your machine to soften the water.
When the visual indicator is dark, there is
enough salt in the container.
When the color is light, open the container and
add dishwasher salt.