Summit DW2432SS User Manual - Manual (Page 17)

15
If you do not know the hardness of your water
supply, use 15 ml / 3 tsp detergent. Increase
the amount of detergent if you see white water
marks especially on the surface of the
glassware.
Find out the hardness of your water supply by
asking your local water department, water
softener company, or county extension agent.
1. Open the detergent container by pushing the
lock to the right (A).
2. Pout/put the detergent into the dispenser.
3. Close the lid until it clicks into place.
• The detergent container holds a total of 40 ml
/ 8 tsp of detergent (1).
• Marking lines on the inside of the detergent
container aids in providing the correct amount
of detergent. When the dishwasher is fully
loaded and the dishes are very dirty, we
recommend filling the detergent container up
to the 25 ml / 8 tsp mark. When the dishes are
less dirty, it is generally sufficient to fill the
detergent up to the 15 ml / 3 tsp mark.
• The detergent amounts for the individual
cleaning programs are shown in the “Quick
Reference Guide – Program Table”.
• Fill amounts given are for standard powder
detergent. Amounts may vary if you use liquid
or concentrated powder detergent. Tablet
detergents should be placed in detergent
container 1. Close the cover.
• Follow instructions on the package of the
detergent when using liquid dishwasher
detergent, concentrated powder detergent or
tablet detergent.
• Deviations are possible depending on how
dirty the dishes are and how hard the water is
in your location.
• If your dishes have been in the dishwasher for
some time without being washed, also fill the
smaller container 2 up to the top.
7.2 FILLING RINSE AID DISPENSER
WARNING
Keep your rinse aids out of the reach of
children. Ingestion or inhalation of rinse aid
may cause serious injury. Avoid contact with
skin and eyes, and keep children and inform
persons away from rinse aids.