Summit DW2432SS User Manual - Manual (Page 18)

16
Notice:
• Only use rinse aids suited for use in
dishwashers (e.g., Jet-Dry). Rinse aids allow
washing water to rinse off more cleanly and
prevent watermarks or streaks on the dishes.
• If you use “2 in 1” or “3 in 1”
detergents/tabs, you do not need
additional rinse aid.
1. Open the rinse aid dispenser by pressing the
lock B.
2. Carefully pour in rinse aid to the MAX mark.
3. Close the lid until it clicks in 3.
4. Carefully wipe off spilled rinse aid. Excessive
rinse aid causes excessive foam formation,
which may hinder cleaning.
SET THE DOSE OF RINSE AID
The dose of rinse aid to be used can be set by
means of the dispenser regulator 4 between
levels 1 and 6.
Change the setting only if the following apply
after washing:
• Watermarks are visible on the dishes: Set
dosage higher.
• Streaks are visible on the dishes: Set dosage
lower.