TCI KMG - Manual (Page 10)

10
Nameplate Data
Figure 1 shows an example of a MotorGuard nameplate. The following information is marked on the
nameplate:
♦ Part number: encoded model number explained on the following page
♦ FLA: the rated continuous operating current (RMS amps)
♦ System Voltage: the maximum VFD output voltage (fundamental)
♦ Hz: the maximum VFD output frequency (fundamental)
♦ Phase: 3 – The MotorGuard is designed for use only with 3 phase motors.
♦ Drawing #: outline and mounting dimension of filter
♦ Schematic #: schematic diagram of filter
♦ Manufacturing #: for TCI internal use
♦ Enclosure Type: Industrial filters are open panel construction
or NEMA 1 enclosed. GP filters
are NEMA 1 or NEMA 3R enclosed.
Figure 1 – Example of MotorGuard Nameplate