Drawings, Typical isometric drawings and schematic diagrams, Isometric drawings – TCI KMG User Manual
Page 30: Schematic diagrams
30
Drawings
Typical Isometric Drawings and Schematic Diagrams
Typical MotorGuard drawings are provided on the following pages. These drawings provide general
information describing your MotorGuard filter. More specific information is provided by the drawings
shipped with the unit. Be sure to carefully review the information provided by these drawings. This
information takes precedence over the information provided in this manual.
Isometric Drawings
The isometric drawings provide three-dimensional representations of the MotorGuard units. Three
drawings are provided to cover units that are constructed on small, medium, and large size panels. The
rating and dimension tables list the dimensions for the various models. Two additional drawings are
provided to show the power wiring connection detail.
Schematic Diagrams
The schematic diagrams show the details of the MotorGuard circuitry. Two diagrams are provided.
The diagram for the small size units shows the power block that is provided for input and output motor
power wiring connections. The diagram for the medium and large size units shows input and output
motor power wiring connected to terminals on the 3-phase reactor.