Traditions Vortek StrikerFire - Manual (Page 27)

LOADING THE PROJECTILE:
TRADITIONS™ SMACKDOWN SABOTED BULLETS:
The plastic material used in our Traditions™ sabots is self-lubricating;
therefore you do not need to pre-lube your bullets or sabots.
1. Insert the base of the bullet
into the sabot, making certain
the bullet is firmly & fully
seated against the bottom of
the sabot.
2. Place the assembled
projectile into the muzzle.
3. Start the projectile with your thumb.
4. Using a ball starter, place
the short shaft on top of the
bullet and push it downward
until the starter hits the top of
the muzzle.
27