Traditions Vortek StrikerFire - Manual (Page 41)

41
Step: #3
Rifle Cleaning & Lubrication:
1. Apply Traditions EZ Clean™ to barrel brush and cleaning patches to
clean both interior and exterior of barrel.
2. Dry barrel interior with several dry bore patches.
3. Lubricate with Wonderlube™ to help protect both interior and
exterior surfaces of both barrel and receiver from rust and to ease
loading.
4. Lightly oil inside of receiver.
5. Lightly grease frame pivot pin (#26) and barrel catch surface on
barrel (#50)
6. Lightly oil all interior and exterior metal surfaces of your rifle.
Step: #4
Reassembly:
1. Reinstall the Barrel Assembly onto the Receiver (#27) and lock into
place.
2. Reinstall the forend stock (#41) onto the barreled action and install
the forend stock screw (#40).
3. Reinstall Ram Rod (#55)
4. Function test to confirm your rifle is fully operational. Reassembly is
now complete.
DETAILED CLEANING & DISASSEMBLY
PROCEDURE
The Vortek StrikerFire™ rifle is designed to reduce internal fouling of
the receiver and it components. Detail disassembly, cleaning,
lubrication and inspection of the entire rifle system should be
performed after you are done shooting for the day and before storing
for an extended period of time. Performing this detailed cleaning will
help to keep your rifle in its best operation condition.
Step: #1
Mandatory Safety Procedures:
1. Follow all safety rules listed above.
2. Press Safety Button (#10) to engage. Safe Button can be switched
for use by right or left handed shooter. Red ring is not visible when
in safe position.
3. De-cock gun by pressing down on the Striker De-cocking Button
(#37) or pressing Barrel Catch Lever (#25) to de-cock gun. Open
action and access breech plug (#46).
4. Remove Accelerator Breech Plug™ (#46) and inspect Barrel (#50)
to be sure your rifle is unprimed, unloaded and free of obstruction.