Unisteer 8011940-01 Mercury Cougar Power Rack 1967-70 - Manual (Page 3)

Page 3 656790
Disassembly:
The first step is to disassemble and remove the stock steering linkage, steering box and column.
1. Disconnect steering shaft from steering box. Raise vehicle and support it on stands. Note be sure not
to put the stand in a location by the stock round cross member.
2. Remove the cotter pins and nuts from outer tie rod ends and remove tie rods from spindles.
Disconnect the center link and idler arm assembly from the frame and remove the entire steering
linkage.
3. Remove bolts retaining the gearbox to the frame and remove the box. If equipped remove the power
steering pump, brackets and lines. All the pieces removed will not be used.