Unisteer 8011940-01 Mercury Cougar Power Rack 1967-70 - Manual (Page 5)

Page 5 656790
6. From under the car remove the stock round cross member from the frame rail to frame rail. Install the
new power rack and bracket in place using the stock holes where the cross member was and install
new hardware provided. Note: Always check to make sure that your bracket is clear of the control
arms and the lip of the frame around the camber adjusting bolts. If the bracket rubs or hits anywhere
it is necessary to grind a little of the edge of the rolled lips of the metal on these parts. DO NOT
GRIND ON THE SUPPLIED BRACKET.