Unisteer 8011940-01 Mercury Cougar Power Rack 1967-70 User Manual
Page 8
Page 8
656790
11. The power steering pump is an easy install and comes with the pump brackets attached to it. If your
car was equipped with power steering you will need to remove the stock pump and brackets that held
it on the motor.
12. Once removed, install the new pump and bracket in place and attach it with supplied hardware and
standoffs provided in kit.
13. The power steering lines have fittings on them that can only be installed one way at the pump. If you
are unclear at all you can trace the lower port on the rack and pinion following the lineup to the pump.
This is the pressure line. The top port at that rack is the return port, which goes to the plastic
reservoir. Be sure to tighten the clamp.
Big Block Pump
Small Block Pump
Small Block Pump
Big Block Pump