Unisteer Ididit Keyless Ignition - Manual (Page 10)

9
EmERGENCy ByPASS mODE:
So that you are never let stranded unable to start your vehicle, The KEY TO
KEYLESS has an “Emergency Bypass” Mode which will allow you to start
your vehicle by using a unique PIN# that can be found on the “Emergency
Bypass Card” that came with your system. This is an important number
to keep with you so put the card in your wallet or write the number down
where you can find it if needed.
To enter emergency Bypass Mode, when the system is ARMED, simply
depress and hold down the brake, then push the systems Programming
Button 10 times, The LED will begin flashing fast.
Next, Using the 4 digit PIN# from your Owner Card. Enter the first number
by pushing the Programming Button the number of times equal to the first
PIN number. EXAmPLE: if your PIN# 5 - 4 - 3 - 2, while the LED is
flashing fast, you would begin by pushing the Programming Button “5X”
then stop, The LED will go OFF for 1 second after each number has been
entered indicating it has accepted the first number,
Next, enter then 2 nd number of your PIN in the same manner, followed by
the 3 rd and finally the 4th number. After the final PIN# has been added, (
If it is correct ) the LED will turn ON solid indicating the system has been
bypassed and is ready to start.
Just take your foot off the brake, then depress the brake again and you can
Start the vehicle.