Owners card – Unisteer Ididit Keyless Ignition User Manual
Page 9
tHE PROGRAmmING BUttON:
the systems “Programming Button” plugs into the side of the ICm.
The Programming Button serves several
functions. It is used to enter Feature Select
Mode and customize feature operation for
your individual vehicle. It is also used if
you were to ever want to add or replace
additional Key FOBs into your system.
In the unfortunate event that you were to
lose your Key FOB and were without a spare, you would be able to start your
vehicle by using the Programming Button to enter your unique PIN# into the
system. This PIN # can be found on your system
“Owners Card”.
You may choose to install the Programming Switch as part of your system
installation or store the Programming switch in a secure location, such as your
trunk until such time it may be needed.
Owners Card for Emergency Bypass:
Included in your
KEy tO KEyLESS- Intelligent Push Button Start system is
an “
Owners Card
with your systems unique 4 digit
PIN#. This number should
be kept with you whenever you drive. The PIN # on the card is entered into
the system via the Programming Button to bypass the system in the event of
a lost Key FOB.
8
OWNERS CARD
PIN #
? - ? - ? - ? - ? - ? - ?
Customer Service
517-424-0577