Warning, for 1970 model year only – Unisteer 8010920-01 Late 1967-70 Mustang Rack Kit User Manual
Page 12
Advertising
Page 12
655650
WARNING, for 1970 model year ONLY
1970 Mustang Column Modification
1. Remove 4 bolts at firewall plate.
2. Remove lower plastic trim panel to access dash hardware.
3. Remove the 3 nuts that retain the steering column to the dash.
4. Disconnect the main wire harness off the ignition switch and the turn signal switch.
5. Make sure the steering box is disconnected and remove the steering column from the
vehicle.
6. Once the column is out of the car, do the following. In a band saw or using a
reciprocating saw cut the steering shaft off as close to the weld of the rag joint as you
can.
Advertising
This manual is related to the following products: