UVP FirstLight UV Transilluminators - Manual (Page 6)

FirstLight UV Transilluminators Page 6
Servicing Procedures
Servicing the Transilluminator
The FirstLight UV illuminator has no serviceable parts at the customer location except the
fuses. See below for replacement fuse part numbers.
NOTE: The warranty is void if the unit is opened! The illuminator must be returned to the factory for
repairs or replacement of parts, except the fuses.
A Returned Goods Authorization (RGA) number must be obtained from UVP Customer Service
before returning any product. Contact UVP for shipping instructions. A shipping box and packing
materials are available if required.
Cleaning and Care of the Transilluminator
Clean unit surface with a damp soft cloth or sponge. Never use abrasive cleaners, solvent based
cleaners or scouring pads as these can damage the UV filter surface.
ALWAYS DISCONNECT THE ILLUMINATOR FROM THE ELECTRICAL POWER PRIOR TO
CLEANING THE UNIT.
To protect the filter glass and minimize moisture and liquids on the glass, use a UV transmitting
Gel-Tray . Refer to the Replacement Parts for ordering information.
Replacement Parts/Accessories
For replacement parts or components not shown here, please call UVP Customer Service or place
of purchase. Please have the transilluminator model number available when calling.
Replacement Part Description Part Number
Cover, UV blocking 19-0121-01
Filter Assembly 38-0254-04 (25x26 cm)
38-0254-02 (20x20 cm)
Grid Lamp Replacement Kit 88-0022-01
Cover, UV-Blocking 19-0121-01
Ballast 42-0061-03
Fuse, 2 amp, 250V, Slo-Blo (all voltages) 56-0022-03 (Qty. 2 Required)
Accessories Description Part Number
Gel-Tray, UV Transmitting, FirstLight 38-0296-02
Fluorescent Focus Target 98-0064-01
Gel-Cutter 85-0002-01
Gel-Scooper 85-0006-01
Gel-Ruler, UV Fluorescing 85-0003-01
Spectacles, UV Blocking 98-0002-01
Goggles, UV Blocking 98-0002-02
Faceshield, UV Blocking 98-0002-04