Waldmann PULSE HFMD version VFC IV - with MFT, Typ I - Manual (Page 11)

11
Operating Manual Light Control „PULSE HFMD - Vers. IV“ ENG
Activate setting level 1
Press both keys
for at least 10 seconds
Actuation Display
Logo flashes white
Lightbar LED 1
Change basic settings - Change setting level
Do not actuate any key for at
least 10 seconds
Activate setting level 2
Press both keys again
for 5 seconds *
Logo is off
Lightbar LED 1+2
Activate setting level 3
Press both keys again
for 5 seconds *
Logo flashes white
Lightbar LED 1+2+3
Leave parameterisation mode
Logo lit permanently
* Within 10 seconds, a change from one level to the next one is possible.
Fig. 3
Key I
Logo
Light
bar
Key II
LED I
LED II
Activate setting level 3
Press both keys again
for 5 seconds *
Logo is off
Lightbar LED 1+2+3+4
Activate setting level 4
LED 1 2 3 4 5 6
Fig. 6