Waldmann PULSE HFMD version VFC IV - with MFT, Typ I - Manual (Page 8)

8
Operating Manual Light Control „PULSE HFMD - Vers. IV“ ENG
Changing basic settings - Part 1
Change to
parameterisation mode
Keep both switches [I and II]
pressed simultaneously for 10
seconds.
- The operating panel changes to
the parameterisation mode (first
to setting level 1).
- The background lit logo flashes
(once per second). The LEDs valid
for the level are lit on the light
bar:
LED 1 Level 1
LED 1+2 Level 2
LED 1+2+3 Level 3
LED 1+2+3+4 Level 4
Fig. 3
Key I
Logo
Light
bar
Key II
LED I
LED II
Change setting level
If both keys [I and II] are pressed
repeatedly within 5 seconds, the
next level is called.
- Level 2 is reached when the logo
stops flashing. LEDs 1+2 are lit
on the light bar.
- Level 3 is reached when the logo
starts flashing again. LEDs 1+2+3
are lit on the light bar.
- Level 4 is reached when the
logo stops flashing again. LEDs
1+2+3+4 are lit on the light bar.
Change function
When the desired setting level is
reached, the setting of the first
function (x.1) is displayed on the
light bar (LED 1 is lit or LED flashing
dark green).
By pressing key II, it is now possi-
ble to switch between functions.
- The LED valid for the level is lit or
flashes on the light bar:
LED 1 Function x.1
LED 2 Function x.2
LED 3 Function x.3
LED 4 Function x.4
LED 5 Function x.5
LED 6 Function x.6
LED 5+6 Function x.7
LED 1 2 3 4 5 6
Fig. 6