WarmlyYours Elements WarmlyYours Towel Warmers - Manual (Page 12)

Bracket Assembly and Installation Diagrams
OPERATION
All models of the Elements™ Towel Warmer Collection include
an easy and accessible “on/off” button. Turn the power “on”
by pressing the red “on/off” button located on the unit. Refer to
Diagram A. The “on” setting is indicated by an “I” and the “off”
setting is indicated by “O.”
A light will illuminate when the button is switched to the “on”
position. In approximately 10-15 minutes, your Towel Warmer will
be warm to the touch. Allow 45 minutes for your Towel Warmer
to reach optimal temperature. Your Towel Warmer is designed to
gradually warm towels over the course of a day and works best
when towels are left to hang for at least 3 hours.
Turn your Towel Warmer off and unplug it when not in use.
On Mode
Towel Warmer runs at 100% power and the towels will reach
temperatures between 75° F and 95° F depending on the following:
operation time, number and size of towels, type of towels, and
ambient room temperature.
11
ON OFF
Diagram A