WarmlyYours Elements WarmlyYours Towel Warmers - Manual (Page 8)

7
Affi xing the Towel Warmer to the Wall - cont’d
WARNING
Measure all dimensions prior to rough-in and installation.
Elements™ model: TW-E4PCP
Anchor Points *
Anchor Points *
Pin Hole
* Note: Anchor points must be attached to a stud.
† Note: 12” between brackets is recommended, but the top
bracket can move up to 2” vertically as desired.
Stud
12” (305mm)
Recommended†
2” (51mm)
8 7/8 ” (200mm)