WarmlyYours Elements WarmlyYours Towel Warmers - Manual (Page 2)

Thank you for choosing a fi nely crafted Towel Warmer from the Elements™
Collection by WarmlyYours. Now you can enjoy the luxury of a warm towel
everyday. These models are so easy to install and use. Just plug the Towel
Warmer unit into a standard 120V outlet, pre-heat your towel warmer and
enjoy a warm, dry towel or bathrobe upon stepping from the shower.
All of the necessary installation and operation instructions are included in this
manual. Please read the instructions carefully before installing and operating
your towel warmer. If you encounter any diffi culties while installing your unit,
installation support is available by telephone between the hours of 8:00am-
5:30pm CST, Monday through Friday by calling (800) 875-5285. Please
reference the model number on the Towel Warmer label when you call. For
label location, see page 11, Diagram A.
SAFETY INFORMATION
• Towel Warmers are designed to warm towels and bathrobes only and should
not be used for any other purpose.
• Never stand, sit, or hang on the Towel Warmer unit.
• Never allow children to play on or with the Towel Warmer. Close supervision
is necessary when using any electrical appliance by or near children.
• Unplug unit and ensure that the electrical circuit breaker is shut off at the
main panel before wiring, repairing, or servicing your Towel Warmer.
• All wiring must be in accordance with the National Electrical Code and
should be performed by a licensed professional who is certifi ed to do
electrical wiring.
• Never place your Towel Warmer inside a shower, sauna or steam room or
immerse in water for any reason.
• Never attempt to warm more than 2 towels on the Towel Warmer at any time.
Overloading the Towel Warmer will cause the unit to become extremely hot
and may result in a burn if touched.
• To provide continued protection against risk of electric shock, plug the unit
into properly grounded outlets only.
• Approved for Household use only; Do not use outdoors.
• Unplug from outlet when not in use.
• Never operate any electrical appliance with a damaged cord or plug.
CLEANING INFORMATION
Unplug the Towel Warmer before cleaning. Clean the Towel Warmer with
a soft, non-abrasive, damp cloth while warm. Once the Towel Warmer has
cooled, lightly polish with a soft dry cloth. Never use abrasive cleaning
powders, metal polish, chlorine or acid based cleaners on any part of the
Towel Warmer.
1