Billion Electric Company BiGuard 50G - Manual (Page 85)

85
Hide ESSID: It is function in which transmits its ESSID to the air so that when
wireless client searches for a network, router can then be discovered and recognized.
Default setting is Disable.
Enable: Select Enable if you do not want broadcast your ESSID. When select
Enable, no one will be able to locate the Access Point (AP) of your router.
Disable: When Disable is selected, you can allow anybody with a wireless client
to be able to locate the Access Point (AP) of your router.
Regulation Domain: There are five Regulation Domains for you to choose from,
including North America (N.America), Europe, France, etc. The Channel ID will
be different based on this setting.
WMM(QOS): Wi-Fi Multimedia (WMM) QoS, the specification provides basic
prioritization of data packets through the wireless network. When enabled, you will
be less likely to hear delays during phone conversations, or higher quality live
streaming whilst watching videos. The improvement is due to the delay of other
network traffics which are not as critical and can be expensed, such as downloading
files where a small delay is generally acceptable. For WMM QoS to work properly
after it is enabled, both the servers and network cards communicating with each
other must support WMM.
WMM-APSD: Enable WMM-APSD if you want to turn on the power saving mode.
WMM Automatic Power Save Delivery (APSD) provides efficient power management
method to the router. It does so by waking up the wireless module of the router
when there is a need to send or receive, then it goes back to sleep mode once the
communication has ended. This mechanism will save more power through the
router than the traditional ‘always on’ method.
Channel ID: Select the ID channel that you would like to use.
Tx Power Level: It is function that enhances the wireless transmitting signal
strength. User may adjust this power level from minimum 0 up to maximum 255.
Note: The Power Level maybe different in each access network user premises
environment and choose the most suitable level for your network.
AP MAC Address: It is a unique hardware address of the Access Point.
AP Firmware Version: The Access Point firmware version.
Wireless Distribution System (WDS)
It is a wireless access point mode that enables wireless link and communication with
other access point. It is easy to be installed, simply define the peer’s MAC address