Yamato Scientific Hitech controller type Ⅳ - Manual (Page 15)

13
↓
Push ▲ or ▼
key and ENTER
key.
(Lighting)
Push ▲or ▼ key to show a desired
temperature of 150_C and push ENTER
key to accept it as Ramp Level 1. The
main display changes from flashing to
lighting,
Approx. l second later
e. g., Requesting to input Soak Time 1 of
Segment 1.
Push ▲ or ▼
key and ENTER
key.
(Lighting)
Push ▲or▼ s key to show a desired
soak time of 1 hour 20 minutes and
push ENTER key to accept it as Soak
Time 1. The main display changes from
flashing to lighting.
Approx. 1 second later Push ▲or ▼ key to turn on or off Wait
Function 1. In this example, you are
working on a step operation so that you
do not need to change the indication.
Push ENTER
key, The main, display changes from
flashing to lighting, notifying that Wit
Function 1 was set.
Approx. 1 second later Requesting to input Fan Revolution.
Push ▲ or ▼ key to set a level of Fan
Revolution in the range from Level 10
(fast) to Level 1 (slow). Default is Level
10. In this example, you accept a fan
revolution of Level 10.
push ENTER
key. The main display changes from flashing
to lighting, notifying that the fan
revolution of Level 10 was set.
You have finished setting Segment 1.