Yamato Scientific Hitech controller type Ⅳ - Manual (Page 24)

22
(Lighting)
Approx. 1 second later
Push
ENTER
key.
The displays return to
their initial indications
shown immediately before
you pushed MODE key.
Accepts the change of the setting from time Accepts the change of the setting from time Accepts the change of the setting from time Accepts the change of the setting from time
to period of operation.
to period of operation. to period of operation. to period of operation.
Note: Time is default setting. When you are setting the operation parameters, you
cannot switch this setting.