Yamato Scientific Hitech controller type Ⅳ - Manual (Page 31)

29
3.7 Communication lock out function
This function makes the communication between the PC and HitecⅣcontroller
enable / disable.
If this function is activated during communicating with a host computer, the
controller closes the communication
Operating Procedure Operating Procedure Operating Procedure Operating Procedure
Key Operation Main Display Sub Display Explanation
Push the MODE
key and then
push either ▲
key or ▼ key
Blink (Communication Lock-
out) on the main display.
The sub display shows the present
setting.
Activates Communication Lock-out Activates Communication Lock-out Activates Communication Lock-out Activates Communication Lock-out
Function setting and releasing mode
Function setting and releasing mode Function setting and releasing mode Function setting and releasing mode
:Communication with PC is
enable.
: Communication with PC is
disable.
Approx. 1 second later
Push the ENTER
key
: Releases Communication
Lock-out state
: Sets Communication Lock-
out state
Push either ▲
key or ▼ key
Choose if you want to bring
the unit to the Communication Lock-out
state.
Accepts the setting of Communication Accepts the setting of Communication Accepts the setting of Communication Accepts the setting of Communication
Lock-out.
Lock-out. Lock-out. Lock-out.
Approx. 1 second later
Push the ENTER
key
Both displays return to the indicating
state just before you pushed the MODE
key when Communication Lock-out is on.
Communication Lock-out Function was set to when the unit is shipped
from the factory.