3D Robotics RTF Aero - Manual (Page 12)

12
Stabalize
Altitude Hold
Loiter
Full Autonomy
Return to Launch
three-position mode switch
forward
(away from you)
back
(towards you)
center
Stabalize
Altitude Hold
Loiter
Full Autonomy
Return to Launch
Stabalize
Altitude Hold
Loiter
Full Autonomy
Return to Launch
two-position mode switch
Spektrum mode switches
forward
(away from you)
back
(towards you)
Stabalize
Altitude Hold
Loiter
Full Autonomy
Return to Launch
Stabalize
Altitude Hold
Loiter
Full Autonomy
Return to Launch
two-position switch
marked GEAR/MIX
three-position switch
marked FLAP/GYRO
available positions 0, 1, 2
Setting flight modes
On 3DR transmitters, use the two-position switch and the
three-position switch shown below to select a flight mode.
FlySky mode switches
two-position switch
marked AIL D/R
available positions 0, 1
three-position switch
marked F MODE
available positions N, 1, 2
The two-position switch activates one of the two groups of modes
then the three-position switch selects the specific mode within the
group. The three-position switch can be set forward (away from you),
center, and back (towards you). The two-position switch can be set
forward and back.