3D Robotics RTF Aero - Manual (Page 25)

25
Check the LED for the status of the autopilot. If you plan to
use loiter, return-to-launch, autonomous, or any other GPS-
required modes during your flight, wait to see the blinking
green light, indicating GPS lock, before proceeding. If you plan
to fly only in manual, stabilize, or fly-by-wire modes, you may
proceed when you see the blinking blue light.
4
LED
Autopilot ready, no GPS
Autopilot ready, GPS locked
If the plane balances on your fingers, then the center of
gravity is correct. If it won’t balance, adjust the position of
the battery until you can balance the plane on two fingers as
shown below.
Initializing, please wait
To arm the motor, press and hold the safety
button until it displays solid red.
5
safety button
Inactive, motor disarmed
Active, motor armed