3D Robotics RTF Aero - Manual (Page 5)

5
guard bag
4S
Charging Complete
Connect the white connector to the 4S port. Join the two yellow
connectors together. Secure the battery inside the guard bag while
charging, and charge until the status indicator displays green.
Protect the battery from extreme heat, extreme cold, puncturing,
and flammable surfaces. Always transport, charge, and store
the battery in the guard bag.
Charge the battery using a designated LiPo balance charger only.
Always monitor the battery while charging.
Flying with a low battery is a safety risk and can render the battery
permanently unusable. Always fly with a fully charged battery.
Inspect the battery for damage before takeoff and after landing.
If you observe any swelling of the package or the battery ceases
to function, locate your local battery recycling center to dispose
of the battery. In the US and Canada, visit call2recycle.org to
find a location. Do not dispose of the battery in the trash.
!
Battery safety