3D Robotics RTF Aero - Manual (Page 13)

13
Flight modes on Spektrum
With GEAR/MIX set to MIX,
set FLAP/GYRO to: 0 for AUTONOMOUS
1 for FLY BY WIRE
2 for RETURN TO LAUNCH
With GEAR/MIX set to GEAR,
set FLAP/GYRO to: 0 for MANUAL
1 for STABILIZE
2 for LOITER
Flight modes on FlySky
With AIL D/R set to 0,
set F MODE to: N for RETURN TO LAUNCH
1 for FLY BY WIRE
2 for AUTONOMOUS
With AIL D/R set to 1,
set F MODE to: N for LOITER
1 for STABILIZE
2 for MANUAL
The Aero includes six flight modes. Manual mode, two assisted flight
modes (stabilize and fly by wire), autonomous mission mode, and two
command modes (loiter and return to launch). The following sections
of this manual describe the behavior of each mode. The Aero’s six
modes are assigned to your transmitter’s mode switches according to
model.