BIXOLON IMPACT PRINTER SRP-270 - Manual (Page 18)

Rev. 3.02 - 18 -
SRP-270
3-2 General Specifications
Item Description Remark
Product
• SRP-270 : RS-232 Serial Communication
• SRP-270S : RS-485 Serial Communication
• SRP-270P : IEEE1284 Parallel Communication
• SRP-270U : USB Communication
Processor
• MITSUBISHI M16C/62 Group M30622 SFP (16 Bit)
Internal RAM Size : 3K Byte
External ROM Version
Memory
• EPROM : 1Mbits (M27C010)
• SRAM : 256Kbits (KM62256)
Interface Serial
(RS-232C / RS-485)
• Flow Control :
1) DTR / DSR (H/W Flow Control)
2) XON / XOFF (S/W Flow Control)
• Baud Rate : 1200 / 2400 / 4800 / 9600 Bps
• Receive Buffer : 4 Kbytes
• Connector : DB25P Female (I/F PBA Side)
The Flow Control, Baud
Rate, Stop Bit and Parity
are determined by DIP
S/W position.
Interface Parallel
• Mode :
1) Forward Mode : Compatibility Mode
2) Reverse Mode : Nibble / Byte Mode
• Connector : Self-Powered
USB
• Transfer Type : BULK
• Speed : 12 Mbps (Full-Speed)
• Power : Self-Powered
Printer
• Printing Method : 9pins Impact Serial Dot
• Printing Speed : 4.6 Line/Sec
Auto Cutter
• Type : Guillotine
• Cutting Method : 1 Point Partial Cutting
Power Consumption • Approx. 24W
AC Adapter
• Input : AC 100V ~ 240V, 50Hz/60Hz
• Output : DC 24V±5%, 1.5A
Environment
Condition • Temperature : 0℃ ~ 40℃
• Humidity : 30% ~ 80% RH
Weight
• 3.2 Kg (A Type) / 3.5 Kg (C Type) / 3.6 Kg (D Type)
• 2.2 Kg (A Type) / 2.5 Kg (C Type) / 2.6 Kg (D Type) Packing
Unpacking
Dimensions(mm)
• A Type : 160 X 249 X 130
• C Type : 160 X 249 X 149
• D Type : 160 X 249 X 160
Reliability
• Head: 300 million dots
• Printer: 18 million lines (MCBF)
• Auto Cutter: 1 million cuts
3-3 Printer Mecha Specifications
3-3-1 Printer Mecha Specification
Item Description Remark
Model • SMP-710/SMP-710N
Print Method • Serial Impact Dot Matrix type (9-Pin Dot)
Printing Direction • Bi-Direction
Printing Speed • 4.6 Lines / Sec (9 x 7 Font 40 Columns)
Printing Resolution • 160(W) x 144(L) DPI
Paper Feeding • Performed by Step Motor
Paper • Rolled Paper : W 76±0.5 x Max ø 83mm
Supply Voltage • 24V ± 10% : Step Motor, Head
• 5V ± 10% : Home Sensor, Motor Driver IC
Connector • 30P (Dot Head, Sensor Signal, Motor Control and Power Input)
• LIFE : Approx.20 Million Print Lines
Head Life • Approx. 300 million Dots / Wire
Weight • Under 650g (Excluding Ribbon Cassette, Auto Cutter)