BIXOLON IMPACT PRINTER SRP-270 - Manual (Page 79)

Rev. 3.02 - 79 -
SRP-270
8-8-2-2 Base Paper Feed Assy - #2
Name of Parts Method and Procedure
① GEAR TAPE UP
② GEAR TU PULLEY
③ WASHER BELT GUIDE
④ WASHER (2.6*5*0.5)
⑤ BRACKET PF L
⑥ SCREW TAPPING (M3*6, 6EA)
⑦ GUIDE PAPER A
⑧ GUIDE PAPER B
1. Make BASE PAPER FEED stand (left side), and then, insert
GEAR TAPE UP to fit SHFAT(D ① -CUT) (long side is
downward). Next, grease SHFAT and teeth of GEAR with HG-
31S.
2. Set GEAR TU ② PULLEY onto SHAFT and insert WASHER ③
BELT GUIDE. Next fix with WASHER. ④
3. Set BRACKET PF L onto BASE PAPE ⑤ R FEED boss, and
then, tighten two SCREW TAPPING. ⑥
4. Rotate BASE PAPER FEED and set GUIDE PAPER A to ⑦
the back face, and then, tighten two SCREW TAPPING step ⑥
by step.
5. Make BASE PAPER FEED stand and set GUIDE PAPER B ⑧
to it, and then, tighten two SCRE ⑥ W TAPPING step by step.