1336 force drives, I-12 – Rockwell Automation 1336-SN-SP20A Snubber Board Kit User Manual
Page 12
Advertising
1336-5.40 – August, 1999
I-12
1336 FORCE Drives
Figure I-5
SCR Assembly Access
1. Remove power from the drive.
2. Turn the enclosure door latches 90 degrees counterclockwise to
open the enclosure door.
3. Turn the latches, located on the left side of the PC Board
Mounting frame, to open the PC Board Mounting Frame. Refer to
Figure I-5.
AB0928
Input Lines
Heat Sink Assembly Ground Cable
PC Board
Mounting Frame
Drive shown with door open, sides removed.
Advertising