Rockwell Automation 1336-SN-SP20A Snubber Board Kit - Manual (Page 14)

1336-5.40 – August, 1999
I-14
1336 IMPACT Drives
Important: IMPACT Drives rated R700C – R800C and 12W700C –
12W800C are accessed in the same manner as the other IMPACT
drives. Refer to “1336 IMPACT Drives” on page I-8 for drive rating
information.
Figure I-7
SCR Assembly Access
1. Remove power from the drive.
2. Turn the enclosure door latches 90 degrees counterclockwise to
open the enclosure door.
3. Turn the latches, located on the left side of the PC Board
Mounting frame, to open the PC Board Mounting Frame. Refer to
Figure I-7.
AB0962
Input Lines
Heat Sink Assembly Ground Cable
PC Board
Mounting Frame
Drive shown with door open, sides removed.