Rockwell Automation 1606-XLP60BQT Power Supply Reference Manual - Manual (Page 2)

All parameters are specified at 12V, 4.5A, 230Vac input, 25°C ambient and after a 5 minutes run-in time unless noted otherwise.
2 Rockwell Automation Publication 1606-RM016A-EN-P — February 2014
Bulletin 1606 Switched Mode Power Supplies
Power Supply
100-240V Wide Range Input
NEC Class 2 Compliant
Adjustable Output Voltage
Efficiency up to 87.6%
Low No-load Losses and Excellent Partial-load Efficiency
Compact Design, Width only 45mm
Electronic Inrush Current Limitation
Operation down to -40°C
Full Output Power up to +60°C
Large International Approval Package
3 Year Warranty
Description
Compact size, light weight, simple installation on the
DIN rail and the integration of the highest quality
components are the factors that make our power
supplies so easy to deploy and use within seconds.
A rugged electrical and mechanical design as well as a
high immunity against electrical disturbances on the
mains provide reliable output power. This power supply
offers superior protection for equipment connected to
the public mains network or exposed to a critical
industrial environment.
and a power rating from 15W to 120W.
The 1606-XLP60BQT is specially designed for electronic
inrush current limitation and is suitable for very low
ambient temperatures.
The unit is fully specified down to -40°C.
Optionally, you may use a supplementary decoupling diode
module to build redundant systems or to protect your
installation against back-feeding voltages.
Specification Quick Reference
Output voltage DC 12V
Adjustment range 12 - 15V
Output current 4.5A at 12V
3.6A at 15V
Output power 54W
Output ripple < 50mVpp 20Hz to 20MHz
Input voltage AC 100-240V -15% / +10%
AC 100V mains
requires derating
Mains frequency 50-60Hz ±6%
AC Input current 0.97 / 0.61A at 120 / 230Vac
Power factor 0.54 / 0.44 at 120 / 230Vac
AC Inrush current typ. 6A input voltage
and temperature
independent
DC Input 88-375Vdc below 130Vdc
derating required
Efficiency 85.8 / 87.6% at 120 / 230Vac
Losses 8.9 / 7.6W at 120 / 230Vac
Temperature range -40°C to +70°C operational
Derating 1.4W/°C +60 to +70°C
Hold-up time typ. 25 / 113ms at 120 / 230Vac
Dimensions 45x75x91mm WxHxD
Weight 250g / 0.55lb
Catalog Numbers
Power Supply 1606-XLP60BQT 12-15V Standard unit
Certification Marks
Ind. Cont. Eq. UL 508
UL 60950-1
Marine
NEC
Class 2
EMC, LVD, RoHS
The XLP family offers output voltages from 5 to 56Vdc
Marine RINA
GOST R C-Tick