Table 1: board connections, Table 2: board jumper – Rockwell Automation 1395 Digital Reference Adapter for RTP Applications User Manual
Page 19
Advertising
Publication 1395-RTP-5.2 - September 1997
Hardware Description
2-7
Table 1: Board Connections
Connectors
Type
Purpose
J1
60 pin Ribbon
Connection to Main Control Board
J2
20 pin Discrete Wire
Connection for Analog I/O Hardware
and Digital Reference Encoder Input
Device via TB3 Terminals 23-42
J3
20 pin Discrete Wire
Connection for Digital I/O Hardware
Devices via TB3 Terminals 43-62
Table 2: Board Jumper
Jumper
Position/Purpose
J4
Do Not Alter (used for testing and serial comm for debugger)
J5
Factory Set, Do Not Alter (used for testing)
J6
Factory set in position 1-2 (used for 5V or 12V driver circuits)
J7
Factory set in position 1-2 (used for 5V or 12V driver circuits)
Advertising