Rockwell Automation 1395 Digital Reference Adapter for RTP Applications - Manual (Page 25)

Publication 1395-RTP-5.2 - September 1997
Chapter
4
Installation
Chapter Content This chapter details the proper procedure for installation and
electrical interconnection of the Digital Reference Adapter Board.
Procedures performed in this chapter include:
• Verification of proper unpacking and inspection
• Verification of proper mounting
• Verification of proper wiring
Important: Normally, all installation and configuration requirements
have been fulfilled when the product is shipped to the
user. This chapter is provided for backup information
should it become necessary to install a Reference
Adapter Board into a different or existing application.
Should there be a need to check or download parameters to the Drive,
use of an ITS device is one of the most efficient methods.
Receiving Once you have received your equipment, carefully inspect for
shipping damage. Damage to the shipping carton is usually a good
indication that it has received rough handling. Do not accept shipment
before checking all items received against the Bill of Lading to ensure
that the description of each item agrees and is the actual item ordered.
Any and all damage should be immediately reported to the freight
carrier and your nearest Allen-Bradley Area Sales/Support Center.
If any concealed damage is found later during unpacking, it is your
responsibility to notify the freight agent. Leave the shipping container
intact and request that the freight agent make a visual inspection of
the shipment.