Rockwell Automation 1492-PRINT220 ClearMark Quick Start User Manual
Page 11
Advertising
11
19. Place a capital "X" in the upper right corner as shown See Figure 15 .
You can leave the "X" in the first column because it will not move with
these upcoming changes.
20. Go to File -> Print, and click [Print].
Figure 15 -
21. If the "X" is centered you are done calibrating and are ready to print. See
section on printing.
22. If the "X" is not centered. Go to File -> Set Printer Correction. See
Figure 16.
Figure 16 -
19
21
25
23
24
Advertising
This manual is related to the following products: