Rockwell Automation 1492-PRINT220 ClearMark Quick Start - Manual (Page 12)

12
23. See Figure 17 for horizontal adjustments
24. See Figure 18 for vertical adjustments.
Figure 17 -
Figure 18 -
25. After making changes to the "Width" or "Height", Click [OK]. Then
select File→Print to check the card.
a. If centered move ahead to Printing with the ClearMark printer on
page 13. If not centered go back to Step 22.
If “X“ appears on
this half of the
card
decrease
the “Actual Width
(X)“ number to
move it back to
center.
If “X“ appears on
this half of the
card
increase
the “Actual Width
(X)“ number to
move it back to
center.
If “X“ appears on this half of the
card
increase the “Actual Height
(Y) “ number to move it back to
center.
If “X“ appears on this half of the
card
decrease the “Actual Height
(Y) “ number to move it back to
center.