Protective cover installation – Rockwell Automation 1494U-D30_D60_D100 Universal Disconnect Switch Installation Instructions (30A, 60A, 100A) User Manual
Page 14
Advertising
(14)
PN-224754
DIR 10001182729 (Version 01)
Protective Cover Installation
1
Position cover in front of switch as shown.
2
Spread sides apart at bottom to fit around fuse block.
3
Rotate cover up and slide top sides into tracks shown on switch.
Push in until fully inserted and pull cover down slightly to ensure
engagement.
4
Press center of cover tight to mounting plate to engage notch in right
side of cover with switch bracket.
5
Ensure flange on left side of cover has snapped under fuse block.
6
Optional: Install high-vibration application screw in bottom slot.
Advertising